UD24 2.4"inch USB tester DC5.5 Type-C digital voltmeter ammeter power bank voltage detector volt QC PD electric meter for APP
Notice: There is a layer of protective film on the screen, please tear off it when you are ready to use.
User manual and APP download
1, User manual, PC software installation instruction and PC software and Android APP download link : http://www.mediafire.com/folder/9r973dly7uvui/UD24
2, IOS APP: search E_test on iphone APP store to download
3. Android APP: https://www.mediafire.com/file/0jiio43c0vuu1wx/U_Meter-Phone_mobile.apk/file
4, Android APP: search E-test at Google play to down load
It can be used as a USB tester or as a DC voltmeter. It is a high-end product created by the wisdom of the industry!
UD24 2.4"inch USB tester DC5.5 Type-C digital voltmeter ammeter power bank voltage detector volt QC PD electric meter for APP
Product description
Voltage measurement range: 5V~32.0V
Current measurement range: 0.00~ 5.10A
Timing time: 999 hours 59 minutes 59 seconds
Input interface: Type-C/Micro USB/USB
Output interface: Type-C/USB
Timing charging reminder setting: countdown 24 hours any set value
USB D+ voltage range: 0V~2.99V
USB D- voltage range: 0V~2.99V
Refresh time:> 500mS/ times> 500mS/ times
Measurement rate: about 0.5 times/sec
Alarm mode: siren sound + display prompt double warning
Display type: large screen with true color digital display with heavy cost 2.4 Chinese and English measurement interface
Self-consumption current: <0.02A
Working temperature: -10~+60°C -10~+60°C
Working humidity: 10~80 (no doubt) 10~80 (no doubt)
Working pressure: 80~106kPa
UD24 Startup screen and function test interface
1.6-digit high-precision interface
2.USB Meter Display
3.DC Meter Display
4.DC Percentage Display
Five-fold intelligent protection, safe charging and double safety
According to their actual needs, the user can set the full power-off switch, full power-off parameter conditions, timing charging time, and over-current, over-voltage, low-voltage and other parameters, so that this equipment can be fully automated and unattended according to your needs. The set parameters run automatically, and the real-time monitoring well automatically cuts off the power according to the corresponding settings to protect your charging equipment in all aspects. From then on, your charging becomes more safe, interesting and playable!
1. FCOP: Full power Cut off (ON/OFF), you can set it yourself when the power is < 1W for 1 minute, it will power cut off
2. TC: Timed charging (ON/OFF), you can set the time period of 01:00-24:00 to charge regularly, when it reaches the setting, it will automatically power cut off
3. Overcurrent protection: you can set the range of 0.0A-5.1A by yourself
4. Over voltage protection: 01V-36V range can be set by yourself
5. Low voltage protection: 00V-35V range can be set by yourself