Description
TX5823S RX5808 600mW 5.8GHz Long Range FPV Video Transmitter Module Wireless Image Transmission Transceiver For UAV
Product Description
TX-5823S: 1.600MW high power, small size. 2. Two modes are available, SPI 48CH and 8-channel mode. 3. Upgraded power adjustment foot, can be steplessly adjusted 0-600MW. RX5808: 1. Double Filter design, completely solve 2.4G drone remote control interference. 2. Two modes are available, SPI 48CH and 8-channel mode. 3. Four-layer board design with low clutter leakage: comply with CE and FCC requirements. Transmitter volume: 22*9*6MM Receiver volume: 36*24*3.5MM
TX5823 is a radio communication device that shares frequencies with non-wireless communication equipment such as industry, science, and medical in the 5645-5965MHz frequency band, and can transmit stereo audio and video within a limited range. It adopts low-power design, integrates VCO, PLL, broadband FM video demodulation, and FM audio carrier frequency to make the module smaller; adopts single-board small package, which is convenient for users to miniaturize applications. The application of this module only needs to simply connect the power supply, single and double audio cables, video cables, and connect the antenna to receive music and image signals.
Basic product parameters
5.8GHz video/audio simultaneous transmission (compatible with PAL and NTSC) -Compact structure, small size, high transmitting power (600mW) -Integrated aviation titanium alloy radiator, low heat generation, high work efficiency -Using large-scale integrated circuits, high reliability -Working voltage DC 3.3-3.6V -8 working channels, key switch selection setting -Built-in frequency phase lock loop, low harmonic radiation, high reliability, stability -Using digital phase-locked loop circuit, no temperature drift phenomenon -Working current: 500mA
Product application
A. UAV FPV system B. Wireless security elevator system C. Wireless vehicle visual system D. Wireless video door mirror WIFI image transmission system E. Industrial and medical endoscopes F. Forensic system
Specification
Absolute maximum ratings (exceeding the maximum ratings may cause permanent damage to internal components) Supply voltage VCC: -0.5~14V Input voltage Vi: -0.5~VCC+0.5V Output voltage Vo, when the load conditions are met: GND~VCC-0.5V Storage temperature Tstg, only refers to the module itself, without packaging: -20~60℃ Humidity 10%~85%RH, Typ 50%RH Recommended working conditions (If the recommended working conditions are not met, the specified electrical performance indicators may not be reached) Supply voltage VCC: 3.3~5V, Typ 3.5V Power supply ripple voltage VIp: 25mVpp, Typ 10mVpp Input voltage Vi: GND~VCC Operating temperature, only refers to the module itself, without other parts: -20~60 ℃, Typ 27℃
|
Electrical characteristics (VCC=5.0V, Ta=25℃)
|
value
|
|
|
Supply current Icc
|
280mA, Typ 550mA, Vcc=12.0V, POWER_ EN>2V
|
|
|
Radio frequency
|
OEM
|
|
|
Output power RFo
|
26~28 dBm, 50Ω system
|
|
|
Output impedance
|
50Ω
|
|
|
Frequency stability Fstb
|
-100~+100 ppm
|
|
|
Video
|
China
|
|
|
Video input impedance RVin
|
75Ω
|
|
|
Video input level Vvin
|
0.9~1.25Vpp, Typ 1Vpp, negative polarity, 75Ω load
|
|
|
Frequency response Fbdv
|
-5~5dB, 50Hz ~ 6MHz
|
|
|
Signal to noise ratio S/N
|
38 dB
|
|
|
Audio
|
500mA
|
|
|
Subcarrier modulation frequency Fal
|
6.4~6.6MHZ, Typ 6.5MHZ
|
|
|
Audio input impedance Rao
|
600~1KΩ, 1kHz sine wave
|
|
|
Audio input level Vao
|
0.8* Vpp, 1kHz sine wave, dual channel
|
|
|
Frequency response Fbda, 100-10kHz, 1.0Vpp sine wave
|
100Hz~10KHz
|
|
|
Harmonic distortion THD, 1kHz, 1.0Vpp sine wave
|
0.6~1.5%
|
|
|
S/N, 1kHz, 1.0Vpp sine wave
|
45dB
|
|
Installation Instructions
TX-5823S transmitter module schematic diagram
1. Antenna interface 2. Band interface 3. Infinite power adjustment 4. The power supply is positive 5V 5. Power negative 6. Audio 7. Video
RX5808 receiving module
1. ANT GND antenna interface 2. VIDEO video 3. A6.5M audio 4. RSSI signal strength detection 5. +5V power supply positive 6. GND power negative 7. CH* channel adjustment port
Note
*. Do not expose the machine to rain or moisture. Do not place in the bathroom, sink, laundry, damp basement, in or next to the swimming pool. *. Do not remove the cover, otherwise it may damage the internal precision parts, and may endanger personal safety. *. Only qualified professionals can repair this machine.
Details Images