Features:
:This fast charging module has powerful functions with voltage, current, power and display,
:Digital display of voltage, current and power, with separate fast charging indicator light,
:High-quality solid-state capacitor, double-wire large inductance, 3 screw positioning holes,
:The default display voltage of digital display can be switched to current and power display by pressing the key.
:Output overcurrent, input overvoltage, input undervoltage, output short circuit protection
Parameters:
:Interface: Type-c+USB dual interface
:Input voltage range: 6-35V, within 33V is recommended.
:Output voltage range: 4V-20v, automatically adjusted according to fast charging protocol
:Support QC4+/QC4/QC3.0/QC2.0/FCP/AFC/SFCP/MTK/SCP/BC1.2/DCP
:Output overcurrent, input overvoltage, input undervoltage, output short circuit protection
:With digital display, display voltage, current and power can be switched by pressing the key
:Soft start function
:Line compensation function of output voltage 50mV@1A
:High-current USB interface
:3 3mm positioning holes
:Plate size: 36 × thirty-eight × 11.3MM
Usage method:
:The input voltage of DC interface or welding wire interface is 6-35V. It is recommended to charge the module in the range of 12V-32V. If the output voltage is 12V, the input voltage must be greater than 12V, and the power supply shall be sufficient. Use the high-current mobile phone charging cable to charge the mobile phone (the quality of the data cable will affect the charging speed). The power indicator will light up after the welding wire is powered on. The default display voltage of digital display can be switched to current and power display by pressing the key. The first digit of current mode displays "C", and the first digit of power mode displays "P".
Protocol introduction:
:Support PPS/PD3.0/PD2.0
:Support QC4+/QC4/QC3.0/QC2.0
:Support AFC/FCP
:Support Samsung fast charging protocol AFC
:Support MTK PE+1.1 and MTK PE+2.0
:Support low voltage SCP/high voltage SCP/SFCP
:Support BC1.2 DCP mode
:Note: The heat sink color batches are different, and the color is randomly distributed.
Precautions for use:
:The module supply voltage is higher than the output voltage because the module is step-down.
:The power supply should be more than 10% of the load power, which means that in addition to ensuring the power supply voltage, the power supply current should also be sufficient.
:The module shall be placed in a place with good ventilation and fan heat, and hot melt adhesive or materials with poor heat conduction shall not be used.
:Module parameters refer to the power supply capacity of the module, and the actual charging power is determined according to the actual use of the mobile phone.
:When encountering use problems, please operate in full accordance with the technical requirements. It can be guaranteed that the technology is professional. If we insist on our own opinions, we will not be able to provide technical support. We must insist on this. We will not provide any support if we disagree.
Description
Product Description
QC4.0 3.0 PD Full Protocol Mobile Phone Fast Charging Module 3526 Chip with Display USB Charging Converter Board
Introdction