HHT-NET2D DC12V IP Network Relay Controller Module Upgraded 2 Channel Internet Watchdog IP Network Control Switch Modules

$22.68
Specification : -
Supplier Type : Original manufacturer
Quantity
Contact us

Get in touch

Please email us at sale1@rfid-life.com with a detailed overview of your project requirement. So that we can offer you the fastest and best support. You may expect a reply within 24 business hours. – Welcomes Your Comments And Questions.


Sales Department

Phone: +86 18205991243
Whatsapp: +86 18205991243
Telegram: +86 18205991243
Email: sale1@rfid-life.com
Address: No.987,High-Tech Park,Huli District,Xiamen,China


Support Department

Email: support@rfid-life.com


Business Hours

Monday - Friday 9am to 6pm

Saturday - 9am to 12am

Sunday - Closed

Description
Product Description

HHT-NET2D DC12V IP Network Relay Controller Module Upgraded 2 Channel Internet Watchdog IP Network Control Switch Modulesdule

Specifications:
 

 

Feature:

1. High Temperature Resistance: This network controller is high temperature resistant and can work in an environment of -40 degrees to +85 degrees.
2. Normally Closed Output: 2 channel IP network relay normally closed output (no normally open output), the output does not carry voltage or current.
3. Featured Function: The relay will actively the set IP. When the fails, the relay will be disconnected for 10 seconds and then closed (this function is used to restart network devices, such as routers).
4. Maximum Load Can be Connected: The network controller with chip and program upgrade can be connected to the maximum load, DC 5A, AC 10A, maximum voltage 250V.
5. Application: This is a network controller that can be used to monitor whether routers or other network devices are disconnected.

Specification:

Item Type: IP Network Relay Module
Model: HHT-NET2D
Power Supply Voltage: DC12V
Industrial Grade Working Environment: -40 to +85 Degrees.
The Maximum Load That Can be Connected: DC 5A, AC 10A, Maximum Voltage 250V.
(Chip and Program Upgrade)


Package List:

1 x Network Watchdog

How to use:
1. The power supply is 7-24V, 12V is recommended. NC1 and COM1 are the first constant closing relay output, and NC2 and COM2 are the second relay output.
2. P5 is used to restore factory equipment. After removing the P5 jumper and powering on again, the factory device can be restored, and the factory device IP is restored to 192.168.0.105. The controller can work in TCP server, TCP client and UDP modes, which is easy to configure using configuration software. After configuration, the jumper wires should be bolted. Turn on the power again.
3. Run the configuration software, select the network card, and click search. After searching the device, double click the list on the left to read the device parameters.