Can Start Electric Drill 3S 40A BMS Board PCB 11.1V 12.6V 18650 3 String Lithium Battery Protection Board--shop.rfid-life.com

Lithium Battery Protection Board

$2.71
Quantity
Wholesale Inquiry

Email: sale1@rfid-life.com

Whatsapp: +86 18205991243

Description

Can Start Electric Drill 3S 40A BMS Board PCB 11.1V 12.6V 18650 3 String Lithium Battery Protection Board
Product Description
Scope of application
Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium battery, no size limit)
For some customers with poor electronic foundation, please explain: Do not mix good battery and poor battery! The closer the capacity/internal resistance of the 3 batteries is, the better! (The effect of 2 good batteries + 1 poor battery) = 3 use of poor battery).
Product size
41*55*3.4mm (enhanced version)
Product weight
8.8g (enhanced version)
Charging voltage
12.6V - 13.6V
Continuous discharge current (upper limit)
40A (If the heat dissipation environment is not good, please reduce the load current)
Continuous charging current (upper limit)
20A
Enhanced version
Suitable for electric drills with starting current below 80A and power below 130W

Note 1

Successfully start the drill requires 3 15C-20C power batteries, or 6 10C-15C power batteries (ordinary 18650 can't start the electric drill! ! !); 0V and 12.6V cable, use 3 square millimeters Above copper wire (cannot use nickel plate! ! !).

Note 2

Strictly follow the wiring of the diagram 0V, 4.2V, 8.4V, 12.6V, do not intentionally short circuit.

Note 3

When charging the battery, the "430" resistor heat is normal, indicating that the equalization circuit is working; if the "430" resistor is also hot in the uncharged state, please check if the wrong line is connected.
Details Images