AC/DC12~24V Multi-function Time Relay Timer Delay Relay 30A Smart Relay Switch Module Direct Connect Electrical Device

Relay Switch Module
$17.86
Quantity
Contact us

Get in touch

Please email us at sale1@rfid-life.com with a detailed overview of your project requirement. So that we can offer you the fastest and best support. You may expect a reply within 24 business hours. – Welcomes Your Comments And Questions.


Sales Department

Phone: +86 18205991243
Whatsapp: +86 18205991243
Telegram: +86 18205991243
Email: sale1@rfid-life.com
Address: No.987,High-Tech Park,Huli District,Xiamen,China


Support Department

Email: support@rfid-life.com


Business Hours

Monday - Friday 9am to 6pm

Saturday - 9am to 12am

Sunday - Closed

Description
AC/DC12~24V Multi-function Time Relay Timer Delay Relay 30A Smart Relay Switch Module Direct Connect Electrical Device
Product Description

The modes can be selected as follows (long press the K1 key for 2 seconds to enter the adjustment mode)

P-1: The signal triggers the relay to pull in, the time is up, the relay is disconnected, during the delay period A: Re-triggering is invalid; B: Re-triggering and re-timing; C: Re-triggering the relay reset to terminate the timing P-2: The signal trigger starts timing time T1, when the time reaches the relay pull-in time T2, it is disconnected (reset) A: Re-trigger is invalid; B: Re-trigger to re-time; C: Start delay without triggering power-on P-3: Circular use: T1 is turned on, T2 is turned off, infinite loop. For T1 and T2, the time is adjustable. If a certain parameter is turned on or off, it can be realized when the power is turned on, or when the power is turned on, the delay is turned on and the power off does not cycle. A: The relay is turned on immediately after power-on P-4: There is a signal, the relay is closed, held and closed, the signal disappears, the timing is started, the time is up, the relay is disconnected, during the delay period, the signal is given again, the timing is canceled, the relay is maintained, the signal disappears, and the timing is restarted.
Specification
item
value
Size
62mmX57.5mmX25mm
Working voltage
AC9~24V, DC12~30V can be
Trigger mode
PNP trigger, positive trigger, external button can be connected
Service life
≥100,000 times
Relay capacity
maximum AC220V 30A or DC30V 30A
Installation Instructions

Button setting instructions

K1: function selection key: long press the K1 key for 2 seconds, P-* appears, short press K1 to select the mode, press K2 to enter the mode K2: shift key: press to adjust the position of the flashing digital tube, which digital tube flashes, K3 will adjust the flashing number The value of the code tube. Until K2 is pressed, the digital tube no longer flashes, the setting time is completed, and the setting is automatically saved and the memory is powered off. K3: When the digital tube is flashing: K3 adjusts the digital change, 0 to 9 change in sequence. When the nixie tube display is normal, K3 adjusts the position of the decimal point, the decimal point in the one place means 0 to 999 minutes, and in the ten place it means 0 to 99.9 seconds without a decimal point means 0 to 999 seconds Note 1: After the working mode is selected, short press K1 to switch between A, B, and C of the function. The digital tube will not always display A or B or C. After short pressing K1, you can only know by triggering the test for the signal. , defaults to A Note 2: Functions P2 and P-3 have 2 sets of time to be adjusted. Press K2 six times to form a cycle. The first three times adjust one time, and the last three times adjust another time (the relay light is on to set the time for the relay to pull in, and it is off to set the time. The time the relay is open.)
Details Images