12V Cycle Control Delay Relay Pulse Width Intermittent Wiper Control Module Cycle Timer Switch Cycle Timer Relay
12V cycle control module cycle timing switch cycle delay relay pulse width module car wiper
This module is used for breaking and opening of the loop control circuit
The time of switching on and off can be independently controlled
The time to disconnect and switch on is adjustable, and the time is between 1 second and 180 seconds.
Function module description
After the module is powered on, the cycle control relay is turned on and off. The on and off times are adjustable, and the on time and off time can be controlled, and the module automatically cycles.
| Module use | monitoring services, test aging, industrial control testing, etc. |
| Working voltage | DC 12V |
| PCB size | 60mm X 19mm |
Delay indicator: When the relay is closed, the light is on, and when the relay is off, the light is off.
On-time adjustment potentiometer: time adjustable, clockwise increase time, counterclockwise decrease time
Disconnect time adjustment potentiometer: time adjustable, clockwise increase time, counterclockwise decrease time
Control power selection:
Shorting cap - shorted, the common end of the relay and the power input voltage are the same
Shorting cap - disconnected, the common end of the relay is not powered (default setting)
The time delay relay module controls the AC wiring diagram:
The relay output terminal pin description is as follows:
When the relay is not energized, the G1 common end is connected to the B1 normally closed end; after the relay is energized, the G1 common end is connected to the K1 normally open end, and the G1 common end is disconnected from the B1 normally closed end.