0 to 60 Minutes Delay Adjustable Timer Relay 12V Multifunction Relay Module Normally Open Relay 10A Load MCU Control

Multifunction Relay Module
$2.65
Quantity
Contact us

Get in touch

Please email us at sale1@rfid-life.com with a detailed overview of your project requirement. So that we can offer you the fastest and best support. You may expect a reply within 24 business hours. – Welcomes Your Comments And Questions.


Sales Department

Phone: +86 18205991243
Whatsapp: +86 18205991243
Telegram: +86 18205991243
Email: sale1@rfid-life.com
Address: No.987,High-Tech Park,Huli District,Xiamen,China


Support Department

Email: support@rfid-life.com


Business Hours

Monday - Friday 9am to 6pm

Saturday - 9am to 12am

Sunday - Closed

Description
0 to 60 Minutes Delay Adjustable Timer Relay 12V Multifunction Relay Module Normally Open Relay 10A Load MCU Control
Product Description
This module is a normally open type, press the switch once, the relay will be turned on immediately, and will be turned off when the set time is reached. The timing from 0 seconds to 1 hour can be set, and 64 time values ​​can be set.
Specification

Electrical performance parameters

Power supply: DC 12V±1.5V Quiescent current: <10mA Load capacity: AC 10A250V or DC 10A30v
Installation Instructions
1
Turn on after triggering, turn off after delay. Configuration method: trigger the termination button, S6 is disconnected.
2
Delay after trigger, turn on after the time is reached. Configuration method: trigger button, S6 connection.
3
After the module is energized, it will be turned on immediately, and it will be turned off after the delay is reached. Configuration method: short-circuit the trigger terminal and disconnect S6.
4
After the module is energized, (the contact is off), it will delay immediately when it opens, and it will turn on after the delay arrives. Configuration method: short-circuit the trigger terminal and connect S6.
The default delivery is "on after trigger, off after delay". In order to facilitate the delivery as soon as possible, please try to choose the default configuration. Due to the large number of batch users of this model, it is not convenient to change the interface configuration. This 2.54 patch cord without power and buttons. Control part 12V voltage, output relay can be connected to 10A 250VAC or 10A 30VDC load Module circuit board size: 7cm x 2cm
This module is controlled by the single-chip microcomputer to control the delay time, the timing is accurate, and the delay function or other functions you need can be customized on the basis of this hardware. The delay length setting needs to use a soldering iron to set the short circuit according to the time value in the table. S6 on the board is used to select the mode. S6 off: the function is delayed off, that is, it is connected after triggering, and the delay is off; S6 short-circuited: the function is delayed on. After the power is turned on, it is in the off state, and the delay starts after the trigger, and it is turned on after the time is reached. Triggered again, it will be turned off immediately and turned on when the time is reached. When all the time short contacts are all disconnected, the trigger is bistable, that is, it is triggered once to pull in, and then it is triggered to disconnect. Control part 5V and 12V voltage are available for purchase, the output relay can be connected to 10A 250Vac or 10A 30VDC load Use low-level signal to trigger, touch the button or the normal button. If the front stage uses a single-chip microcomputer or other logic circuit to trigger, please use optocoupler isolation, or purchase a 5V module for matching use. And confirm that the low-level trigger is used. The control signal is a trigger type, and the signal is cancelled or maintained after the trigger does not affect the delay. Trigger again during the delay process, and the timing will be restarted. Module circuit board size: 7cm x 2cm This module is available in versions with normally open and normally closed changeover contacts. Reminder: Do not connect the wrong voltage or reverse the polarity of the power supply.
Details Images